Multipurpose Grease NLGI-2 Detail
Specificications
NLGI: 2
| Test Method | Test Description | Test Limits |
|---|---|---|
| ASTM D-217 | Penetration Worked at 25 °C: | 250 - 300 |
| ASTM D-972 | Evaporation Loss at 99 °C %wt | 10.0 Max |
| ASTM D-1742 | Oil Separation by air Pressure Method | 6.0 Max |
| ASTM D-566 | Dropping Point °C | 180 Min |
| ASTM D-942 | Oxidation Stability pressure drop after 100 Hrs | 10.0 Max |
| ASTM D-4048 | Corrosiveness to Copper a Condition to Copper Strip b Copper Strip Rating |
No etching or pitting 1b Max |
| ASTM D-1831 | Roll Stability Penetration after Test (Variation from Originial work penetration |
+60 to -25 |
| ASTM D-217 | Water Stability Variation of Penetration from Work Penetration of Originial Grease |
+60 to -25 |
| Low Temperature Pumping Properties at -18 °C | Pass | |
| ASTM D-2266 | Water Preventive Characteristics Avg. scar Dia mm | 0.70 Max |
| ASTM D-1743 | Rust Preventive Properties (Outer Race Only) ASTM Rating | Pass |
| ASTM D-3340 | Determination of Lithium in Lubricating Grease by Flame Photometer | Lithium |
| IP-134 | Foreign Particles per ml a 25 um or above b 75 um or above c 125 um or above |
7500 Max 1600 Max Nil |
ASTM: American Society for Testing and Materials
NLGI: National Lubricating Grease Institute
Specificications
NLGI: 2
| Test Method | Test Description | Test Limits |
|---|---|---|
| ASTM D-217 | Penetration Worked at 25 °C: | 250 - 300 |
| ASTM D-972 | Evaporation Loss at 99 °C %wt | 10.0 Max |
| ASTM D-1742 | Oil Separation by air Pressure Method | 6.0 Max |
| ASTM D-566 | Dropping Point °C | 180 Min |
| ASTM D-942 | Oxidation Stability pressure drop after 100 Hrs | 10.0 Max |
| ASTM D-4048 | Corrosiveness to Copper a Condition to Copper Strip b Copper Strip Rating |
No etching or pitting 1b Max |
| ASTM D-1831 | Roll Stability Penetration after Test (Variation from Originial work penetration |
+60 to -25 |
| ASTM D-217 | Water Stability Variation of Penetration from Work Penetration of Originial Grease |
+60 to -25 |
| Low Temperature Pumping Properties at -18 °C | Pass | |
| ASTM D-2266 | Water Preventive Characteristics Avg. scar Dia mm | 0.70 Max |
| ASTM D-1743 | Rust Preventive Properties (Outer Race Only) ASTM Rating | Pass |
| ASTM D-3340 | Determination of Lithium in Lubricating Grease by Flame Photometer | Lithium |
| IP-134 | Foreign Particles per ml a 25 um or above b 75 um or above c 125 um or above |
7500 Max 1600 Max Nil |
ASTM: American Society for Testing and Materials
NLGI: National Lubricating Grease Institute
Company Portfolio
Media
Distribution Network
Copyright © 2023 Chicago Group. All rights reserved.