Introduction

Metal Cutting-Oil
For : Grinding, Milling, Hobbing, Turning, Boring and Drilling Operations.

Why should you use Servo Cool-Cut?

• Long Drain: 
  - Stays odor-free longer 
  - Inhibits rust longer.
• EP Additives Added:
  - No welding of metal on cutting-tool tip 
  - Increasing tool life.
• Good Emulsifier:
  - Easily soluble in water.
• High Dispersant Formula:
  - Low surface tension - after turn-off the machine and work piece are free of any coolant deposits.
• Glaze Free:
  - Keeps the grinding wheels glaze free 
  - Extends dressing time.

Suggested Mix Ratio Chart:

Grey Cast Iron and steel :

• Grinding Operations
  - Servo Cutting Oil 1 Liter : Water 10 Liters
• Turning Operations
  - Servo Cutting Oil 1 Liter : Water 15 Liters
• All other Operations
  - Servo Cutting Oil 1 Liter : Water 20 Liters

Aluminium and Copper:

• Grinding Operations
  - Servo Cutting Oil 1 Liter : Water 2 Liters
• Turning Operations
  - Servo Cutting Oil 1 Liter : Water 3 Liters
• All other Operations
  - Servo Cutting Oil 1 Liter : Water 5 Liters

Note : Mixing Ratios can be adjusted as per requirement of the operation.

Packing

20L Plastic Can - 205L Steel Drum

Protect Environment

• Flammable in concentrate position.
• Non-Flammable once mixed in water.
• Dispose-off used cutting-oil in a proper manner.
• Do not swallow - Keep away from eyes.